voltage variable absorptive attenuator, 1700 - 2000 mhz rev. v2 maav - 007090 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 features ? input ip3: +31 dbm min (full attenuation range) ? input ip3 is 15 - 20 db better than gaas ? linear operation: +20 dbm typ . ? 35 db dynamic range (with 30 ma bias current) ? single control voltage ? 50 ohm impedance ? linear driver, madr - 007098 - 000100 , available ? test boards are available ? tape and reel packaging available ? lead - free sow - 16 package ? 100% matte tin plating over copper ? halogen - free green mold compound ? 260c reflow compatible ? rohs* compliant version of at10 - 0017 description m/a - com's maav - 007090 - 000100 is a pin diode based voltage variable attenuator. this device is in a sow - 16, wide body plastic surface mount package. these attenuators have linear operating power and input intercept point levels 15 - 20 db better than gaas fet mmic voltage variable attenuators. they are ideally suited for use where low distortion, high linear operating power and high dynamic range are required. these devices are optimized for the pcs frequency band, but exhibit excellent performance and repeatability over the entire specified frequency band. the maav - 007090 - 000100 is ideally suited for wireless communications systems. ordering information part number package maav - 007090 - 000100 tube maav - 007090 - 0001tr 1000 piece reel maav - 007090 - 0001tb unit mounted on test board maav - 007090 - dr01tb unit with driver on test board note: reference application note m513 for reel size information. functional schematic pin configuration pin no. function pin no. function 1 gnd 9 gnd 2 rf 10 rf 3 gnd 11 gnd 4 gnd 12 gnd 5 gnd 13 gnd 6 gnd 14 gnd 7 bias 1 15 bias 1 8 gnd 16 gnd * restrictions on hazardous substances, european union directive 2002/95/ec. 1. bias currents may be applied to pin 7 or 15. the unused pins should be isolated.
voltage variable absorptive attenuator, 1700 - 2000 mhz rev. v2 maav - 007090 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 electrical specifications: t a = 25 c, z 0 = 50 ? parameter test conditions frequency units min typ max insertion loss 0 volts 1700 - 2000 mhz 1930 - 1990 mhz db db 2.5 3.5 3.0 attenuation (above loss) 10 ma bias current 1700 - 2000 mhz 1930 - 1990 mhz db db 28 30 35 attenuation flatness 0 to 30 db attenuation 1700 - 2000 mhz 1930 - 1990 mhz db db 1.5 0.4 2.0 0.6 vswr 0 to 30 db attenuation 1700 - 2000 mhz 1930 - 1990 mhz ratio ratio - 1.6:1 1.5:1 1.8:1 1.7:1 switching speed 50% control to 90%/10% rf 1700 - 2000 mhz s 3.0 linear operation 1700 - 2000 mhz dbm +20 input ip 3 two - tone inputs up to +10 dbm 1700 - 2000 mhz dbm +31 - i control 1700 - 2000 mhz ma - 30 recommended pcb configuration absolute maximum ratings 2,3 parameter absolute maximum max. input power 1700 - 2000 mhz + 27 dbm operating temperature - 40 c to +85c storage temperature - 65 c to +125c 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a - com does not recommend sustained operation near these survivability limits. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices.
voltage variable absorptive attenuator, 1700 - 2000 mhz rev. v2 maav - 007090 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 attenuation flatness (db) @ +25c typical vswr @ +25c attenuation vs. bias current, frequency = 2000 mhz typical performance curves insertion loss 1.0 2.0 3.0 4.0 5.0 1600 1700 1800 1900 2000 2100 fre que ncy (mhz ) loss (db) +2 5c - 4 0 c +8 5c 1.0 1.5 2.0 2.5 1600 1700 1800 1900 2000 2100 fre que ncy (mhz ) vswr (ratio) r ef 15 d b 3 0 d b 0 10 20 30 40 0 1 2 3 4 5 6 7 8 9 10 bias current (ma) attenuation (db) +2 5 c +8 5 c - 4 0 c -2.00 -1.00 0.00 1.00 2.00 1600 1700 1800 1900 2000 2100 fre que ncy (mhz ) flatness (db) r ef 10 d b 2 0 d b 3 0 d b
voltage variable absorptive attenuator, 1700 - 2000 mhz rev. v2 maav - 007090 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 lead - free, sow - 16 ? ? reference application note m538 for lead - free solder reflow recommendations.
voltage variable absorptive attenuator, 1700 - 2000 mhz rev. v2 maav - 007090 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 5 m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
